Silicone and Acrylic Masonry Sealer

Silicone S50 is an excellent product consisting of a 50/50 mix of silicone-based Driwal P6* and a gloss acrylic-based sealer LB9.

It offers a blend of penetrating sealant that works its way into the substrate of the paver, while also leaving a light acrylic surface coat that enhances the colour of the paver and gives a slight sheen – a bit like a satin finish.

This type of sealer is the most popular from our experience. It makes cleaning your paving areas a breeze.

The Silicone S50 gives long-term protection to press, wire cut bricks, concrete pavers, concrete walling and retaining wall block, sandstone, Mt Gambier wall cladding and terracotta or cement tiles.

Benefits of Applying This Sealer

Silicone S50 is a unique combination of Silicone and Acrylic Glazing Liquid. Surfaces treated are not only water repellent but sealed to resist the penetration of rainwater under wind pressure. In a single application, it highlights the natural colour of masonry but does not produce a glazed finish.

Two applications, however, produce a ‘wet’ effect and a subdued glaze to dense surfaces such as exposed aggregate concrete panels and roof tiles.

It protects against weathering, staining or mould decay while enhancing natural texture and appearance. It is a protective surface treatment for all masonry in marine environments. It provides long-term preservation and protection for pre-cast exposed aggregate panels, architectural concrete and masonry.

Recommended Applications

All natural unpainted masonry surfaces.